Forged Charcoal is a dark grey charcoal metallic. This color is a polyurethane metallic powder coat and has a matte finish.
Matte: 7-20 Gloss Units
This color is not recommended for exterior exposure without applying a UV-resistant top coat. Applying a clear top coat may improve UV resistance, weather stability, and the finish's overall durability. It is important to note that a top coat can alter the appearance, color, and/or finish of the base coat. Inconsistent mil thickness of the base coat or top coat can lead to uneven color results. Apply the base coat and top coat according to the recommended mil thickness listed. Wait until the part has thoroughly cooled before applying the top coat. After the top coat has been applied, fully cure according to the topcoat's recommended cure schedule. We strongly recommend spraying a test panel before applying any top coat, or additional base coats to your project. This ensures the final color meets your specifications and allows you to be fully prepared for any potential color or finish changes.
Start with a common job, or enter your own
in
in
Powder (optional, adds the price)
UMB-6578 · from $15.01/lb
Powder to buy
Enter a size to see how much to buy.
Prismatic Powders coverage calculator
| Part | Size | Qty | Area | Powder each |
|---|---|---|---|---|
| Flat panel | ? × ? in, both sides | 1 | 0 ft² | — |
| Coat | Powder | Thickness | Buy | Cost |
|---|---|---|---|---|
| Color coat | Forged Charcoal (UMB-6578) | 3 mil | 0 lb | $0.00 |
Total: 0 ft² · 0 lb · $0.00
Assumes 50% of sprayed powder stays on the part and 10% extra. This is an estimate: actual use depends on your gun, setup and parts. If you’re unsure, order more than you think you need, or call us to discuss your order at 1-866-774-7628. Prices may change.
Note on Custom/Large Orders: Bulk orders or specialized formulations may require additional lead time. If your order requires extra processing time, our team will notify you immediately.
No specifications available.
RIM WIZARD LLC.
—
Does Forged Charcoal UMB-6578 need a clear coat and if so what clear coat can I use and still maintain the gloss level that Forged Charcoal UMB-6578 provides ?
Answer from Admin
We recommend using a clear coat for Forged Charcoal UMB-6578 if used outside or exposed to chemicals that could cause the metallic flakes to corrode. In order to maintain the same gloss level (7-10 gloss units) applying Matte Clear PPB-4509 will help maintain the original look. We recommend always applying to a test piece making sure you like the finished product before committing the parts to coating.
See more projects using FORGED CHARCOAL UMB-6578 in our gallery.
| Starting quantity | Price per lb | Savings |
|---|---|---|
| 1 lb | US$ 15.01 | — |
| 50 lb | US$ 14.26 | Save 5% |
| 200 lb | US$ 13.51 | Save 10% |
US$ 15.01 / per lb
Starting quantity: 1 lb
Total for 1 lb: $15.01
Estimated lead time: 0 days
US$ 15.01
per lbUMB-6578
Forged Charcoal
US$ 15.01
/ lb