Alien Silver is a vibrant silver with a heavy bright silver metallic flake. This color is a polyester metallic powder coat and has a glossy finish.
Gloss: 71-85 Gloss Units
***A clear top coat, such as Clear Vision PPS-2974, is recommended for exterior use.
Start with a common job, or enter your own
in
in
Powder (optional, adds the price)
PMS-2569 · from $20.17/lb
Powder to buy
Enter a size to see how much to buy.
Prismatic Powders coverage calculator
| Part | Size | Qty | Area | Powder each |
|---|---|---|---|---|
| Flat panel | ? × ? in, both sides | 1 | 0 ft² | — |
| Coat | Powder | Thickness | Buy | Cost |
|---|---|---|---|---|
| Color coat | Alien Silver (PMS-2569) | 3 mil | 0 lb | $0.00 |
Total: 0 ft² · 0 lb · $0.00
Assumes 50% of sprayed powder stays on the part and 10% extra. This is an estimate: actual use depends on your gun, setup and parts. If you’re unsure, order more than you think you need, or call us to discuss your order at 1-866-774-7628. Prices may change.
Note on Custom/Large Orders: Bulk orders or specialized formulations may require additional lead time. If your order requires extra processing time, our team will notify you immediately.
No specifications available.
Joshua Patrick
—
When applying Clear Vision PPS-2974 over Alien Silver PMS-2569, what is the procedure for application and cure ?
Answer from Admin
When a silver is applied as a base coat you will want to consider the level of metallic flake and base your base coat oven time with this in mind. In most cases (except for a couple of finishes) base coats are brought to "gel-out" or "flow-out" which is when the powder changes from a powder state into a gelled or melted state. For metallic base coats you will want to add some time to this gel-out or flow-out depending on the level of metallic flake within that base coat. Here is an article within our knowledgebase that will provide some guidance on gel-out or flow-out time.
https://www.prismaticpowders.com/learn/1/how-do-i-know-when-powder-coating-is-partially-cured
Bradley Schoenherr
—
I am planning to apply Candy Purple PPS-4442 over a base coat of Alien Silver PMS-2569 on to my off-road ATV. Would you recommend applying a primer or additional top coat?
Answer from Admin
This will make for a great combination!
Basically the two coatings of Candy Purple PPS-4442 with an Alien Silver PMS-2569 base coat will work well to protect your part and give a great appearance. That being said there are always way to add more finish protection.
Your Candy Purple PPS-4442 is your top coat but if you wanted to apply another Clear Coat for additional protection (from sand, rocks, brush) then our Clear Vision PPS-2974 would be a great choice. Applying a primer is not necessary but again, this depends on your use. If riding this ATV in a salt air environment or exposed to salt water then our Epoxy based primers are a great additional barrier to prevent corrosion from happening to your metal substrate.
Scott Zufelt
—
When applying a Transparent Top Coat over a Metallic Base Coat how long do I partial cure the Metallic Base?
Answer from Admin
Here is an excellent article in our knowledgebase that can help guide you through this process.
https://www.prismaticpowders.com/learn/58/clear-coating-metallic-powders-quick-tips
Page 1 of 2
See more projects using Alien Silver PMS-2569 in our gallery.
| Starting quantity | Price per lb | Savings |
|---|---|---|
| 1 lb | US$ 20.17 | — |
| 50 lb | US$ 19.16 | Save 5% |
| 200 lb | US$ 18.15 | Save 10% |
US$ 20.17 / per lb
Starting quantity: 1 lb
Total for 1 lb: $20.17
Estimated lead time: 0 days
US$ 20.17
per lbPMS-2569
Alien Silver
US$ 20.17
/ lb