BMW Silver is a vibrant metallic silver. This color is a polyester metallic powder coat and has a semi-gloss finish.
Semi-Gloss: 37-70 Gloss Units
*A clear top coat is recommended for exterior use*
Start with a common job, or enter your own
in
in
Powder (optional, adds the price)
PMB-6525 · from $25.41/lb
Powder to buy
Enter a size to see how much to buy.
Prismatic Powders coverage calculator
| Part | Size | Qty | Area | Powder each |
|---|---|---|---|---|
| Flat panel | ? × ? in, both sides | 1 | 0 ft² | — |
| Coat | Powder | Thickness | Buy | Cost |
|---|---|---|---|---|
| Color coat | BMW SILVER (PMB-6525) | 3 mil | 0 lb | $0.00 |
Total: 0 ft² · 0 lb · $0.00
Assumes 50% of sprayed powder stays on the part and 10% extra. This is an estimate: actual use depends on your gun, setup and parts. If you’re unsure, order more than you think you need, or call us to discuss your order at 1-866-774-7628. Prices may change.
Note on Custom/Large Orders: Bulk orders or specialized formulations may require additional lead time. If your order requires extra processing time, our team will notify you immediately.
No specifications available.
Ryan Olsommer
—
Can this be IR Cured?
Answer from Admin
Yes it can be, but IR curing has it's limitations from part to part. If you are familiar with IR curing than you already know. IR curing offers short cure cycles but because it is base on radiation, the curing is done "line of sight". So to have even curing over all the surface area of the part, the lamps must be directed all the way around the part being cured, which can present some challenges based on the part.
| Starting quantity | Price per lb | Savings |
|---|---|---|
| 1 lb | US$ 25.41 | — |
| 50 lb | US$ 24.14 | Save 5% |
| 200 lb | US$ 22.87 | Save 10% |
US$ 25.41 / per lb
Starting quantity: 1 lb
Total for 1 lb: $25.41
Estimated lead time: 0 days
US$ 25.41
per lbPMB-6525
BMW SILVER
US$ 25.41
/ lb