Silvery Artery is a black and silver contrast with an organic circle pattern and smooth and mild texture. This color is a polyester vein powder coat and has a satin finish.
Satin: 21-35 Gloss Units
This color is not recommended for exterior exposure without applying a UV-resistant top coat.Applying a clear top coat may improve UV resistance, weather stability, and the finish's overall durability. It is important to note that a top coat can alter the appearance, color, and/or finish of the base coat. Inconsistent mil thickness of the base coat or top coat can lead to uneven color results. Apply the base coat and top coat according to the recommended mil thickness listed. Wait until the part has thoroughly cooled before applying the top coat. After the top coat has been applied, fully cure according to the topcoat's recommended cure schedule.We strongly recommend spraying a test panel before applying any top coat, or additional base coats to your project. This ensures the final color meets your specifications and allows you to be fully prepared for any potential color or finish changes.Input
in
in
Output
0.00 ft2
1 lbs
Note on Custom/Large Orders: Bulk orders or specialized formulations may require additional lead time. If your order requires extra processing time, our team will notify you immediately.
No specifications available.
Alexander McRoberts
—
Is there an orange top coat that can be used with silver artery? Looking for a black/orange artery look.
Answer from NIC Industries Inc.
I would recommend either our Lollypop Tangelo (PPS-2291) or Striker Orange (PPS-4750) to be applied over Silver Artery to achieve the look you’re going for!
PREMIUM FABRICATION
—
what are the suggested finished mils for Silver Artery (PVS-3014)?
Answer from NIC Industries Inc.
We recommend 3-4mils for our Silver Artery (PVS-3014).
anthony nuckoll
—
I had a problem with shooting a yeti cup using silver artery powder it did not have the black and silver texture after curing. It had a smooth texture of silver and black hammer look on only some parts of my cups. I am using Eastwood dual voltage gun and did not touch cup with bare hands. I shot cup with a lollipop red translucent first and cured. Then added removable vinyl over that and shot the silver artery. went around the entire cup three times for coverage. the areas where it had the black texture was on the bottom of cup and where the vinyl transfer tape stuck to it before removed. but the rest of cup has smooth silver only.
Answer from Admin
It sounds like you may have a thickness issue, perhaps too heavy. If it's too heavy, you can loose the vein texture and it becomes more silver. You might want to contact our Technical Adviser for some assistance. technicalsupport@prismaticpowders.com pictures will be helpful if you have them.
See more projects using Silver Artery PVS-3014 in our gallery.
| Starting quantity | Price per lb | Savings |
|---|---|---|
| 1 lb | US$ 13.41 | — |
| 50 lb | US$Â 12.74 | Save 5% |
| 200 lb | US$Â 12.07 | Save 10% |
US$Â 13.41 / per lb
Starting quantity: 1 lb
Total for 1 lb: $13.41
US$Â 13.41
per lbPVS-3014
Silver Artery
US$Â 13.41
/ lb