Misty Silver II is a heavily textured silver vein. This color is a polyester vein powder coat and has a semi-gloss finish.
Semi-Gloss: 37-70 Gloss Units
*This color is also available in the following alternative finishes:
| Starting quantity | Price per lb | Savings |
|---|---|---|
| 1 lb | US$ 12.37 | — |
| 50 lb | US$ 11.75 | Save 5% |
| 200 lb | US$ 11.13 | Save 10% |
US$ 12.37 / per lb
Starting quantity: 1 lb
Total for 1 lb: $12.37
US$ 12.37
per lbPVB-4587
Misty Silver II
US$ 12.37
/ lbSafety Data Sheet
Application Guide
See more projects using Misty Silver II PVB-4587 in our gallery.
Technical Data Sheet
Input
in
in
Output
0.00 ft2
1 lbs
Note on Custom/Large Orders: Bulk orders or specialized formulations may require additional lead time. If your order requires extra processing time, our team will notify you immediately.
No specifications available.
JDV METAL DESIGNS
—
I have applied Misty Silver II PVB-4587 and am getting an uneven pattern. Some areas are good and others areas seem light. Is this normal? I baked according to the schedule at 400 degree F. for 12 minutes making sure the metal reached 400 before setting the cure timer.
Answer from Admin
Consistent application of silver metallic Vein and Artery powders like Misty Silver II PVB-4587 can depend on a variety of circumstances including: Substrate prep, Gun settings, Ground connection, Cure time (including part metal temp) and application thickness. Vein or Artery powders are recommended to be applied a bit heavier than some standard solid tone powders. An application of 3-4 mil will ensure the low spots are not exposing the substrate to ambient air after cure. Making sure the thickest part of your substrate reaches the required cure temperature before setting your 12 minute timer is important. If heavier areas are not allowed to cure fully the vein pattern will look different than thinner areas of the part that were able to reach cure temperature more quickly.