Ozmotiar is a bright lemon yellow with a silver metallic flake. This color is a transparent polyester powder coat and has a gloss finish.
Gloss: 71-85 Gloss Units
Transparent powder coatings allow the underlying substrate to influence the final color, depth, brightness, and reflectivity. The S-Panel image and Prismatic Powders swatches are applied over a smooth, bare aluminum substrate; while Super Chrome Plus UMS-10671 provides a bright, reflective base for candy and transparent topcoats, the resulting appearance will not be identical to the S-Panel or swatches. Less-reflective substrates may produce a softer or more muted appearance, so we always recommend shooting a test panel to confirm the desired results.
Safety Data Sheet
Application Guide
Start with a common job, or enter your own
in
in
Powder (optional, adds the price)
PPB-4031 · from $17.74/lb
Powder to buy
Enter a size to see how much to buy.
Prismatic Powders coverage calculator
| Part | Size | Qty | Area | Powder each |
|---|---|---|---|---|
| Flat panel | ? × ? in, both sides | 1 | 0 ft² | — |
| Coat | Powder | Thickness | Buy | Cost |
|---|---|---|---|---|
| Color coat | Ozmotiar (PPB-4031) | 3 mil | 0 lb | $0.00 |
Total: 0 ft² · 0 lb · $0.00
Assumes 50% of sprayed powder stays on the part and 10% extra. This is an estimate: actual use depends on your gun, setup and parts. If you’re unsure, order more than you think you need, or call us to discuss your order at 1-866-774-7628. Prices may change.
Note on Custom/Large Orders: Bulk orders or specialized formulations may require additional lead time. If your order requires extra processing time, our team will notify you immediately.
No specifications available.
Dan Bron
—
I'm going to use Ozmotiar PPB-4031 on some aluminum cast parts that are rough and dark, not bright. What base coat should i use? Super Chrome is recommended in the description but no longer available. What base coat do you recommend in Super Chrome's place?
Answer from Admin
Making sure you did a complete outgas on the cast parts any bright base coat will work well as a base coat for Ozmotiar PPB-4031. Brushed Aluminum will work well as will heavy and bright silver metallic coatings. Alien Silver PMS-2569 comes to mind. If you would like to see what these bases look like under the Ozmotiar PPB-4031 top coat we do offer a two coat custom spray-out service. Highly recommended to make sure you will achieve the finish you are looking for before committing to powder orders. Here are those details:
If you would like a custom spray-out of any combination, we can provide that for a fee of $9.95 each plus shipping. This would be a custom panel with two coats of your choice. For a custom panel with three coats (base, mid and top coat), the fee is $14.95. The custom panels measure 3” x 5” and can take approximately 2 - 4 days to complete. Any order for such panels would need to be called in as they are not available online at this time.
See more projects using OZMOTIAR PPB-4031 in our gallery.
| Starting quantity | Price per lb | Savings |
|---|---|---|
| 1 lb | US$ 17.74 | — |
| 50 lb | US$ 16.85 | Save 5% |
| 200 lb | US$ 15.97 | Save 10% |
US$ 17.74 / per lb
Starting quantity: 1 lb
Total for 1 lb: $17.74
Estimated lead time: 0 days
US$ 17.74
per lbPPB-4031
Ozmotiar
US$ 17.74
/ lb