Illusion Sky Blue is an icy blue chrome metallic. This color is a dormant polyester metallic powder coat and has a high gloss finish.
High Gloss: 85+ Gloss Units
Illusion Sky Blue – Vibrant Chrome Sky Blue with Easy-To-Use Illusion Finish
Developed in collaboration with Zachary Terrell of Stay Spooled, our Illusion Sky Blue brings the vibrant, rich finish of a transparent candy into an easy-to-use, UV-stable Illusion formulation. Formulated for coaters who demand flawless results, this striking light chrome blue creates an incredible wet-look finish with an effortless two-coat application.
Key Features:
Whether you’re tackling an intricate custom build or a high-end project, Illusion Sky Blue delivers a deep, icy chrome coat that elevates every edge.
To achieve the proper color, a clear topcoat must be applied. Inconsistent mil thickness of either the basecoat or topcoat can result in uneven color. Flash, or partially cure, the Illusion basecoat for 5 minutes after the powder has flowed to a gloss state, with both oven and part metal temperatures at 375°F (190°C). Allow the part to cool completely before applying the topcoat. Once the topcoat has been applied, fully cure it according to the topcoat’s recommended cure schedule. We strongly recommend spraying a test panel prior to starting your project.
Safety Data Sheet
Application Guide
Input
in
in
Output
0.00 ft2
1 lbs
Note on Custom/Large Orders: Bulk orders or specialized formulations may require additional lead time. If your order requires extra processing time, our team will notify you immediately.
No specifications available.
Rey Rivera
—
When applying an Illusion color like Illusion Orange PMS-4620 can any clear coat be used as the Illusion top-coat?
Answer from Admin
Any Clear Coat or Top-Coat can be used as an Illusion top-coat. Keep in mind that the end result will be different than the on-line S-panel representation or the sample swatches that are shipped out for reference. These images and swatches have Clear Vision PPS-2974 applied. You can find examples of other top-coats used including tinted transparent top-coats on our website gallery and "creations" section.
Mark Kampman
—
What is the proper way to cure Illusion colors before applying Clear Vision PPS-2974? I've read a few contradicting things. Want to make sure i get the best results possible.
Answer from Admin
Illusion series should only be applied directly over substrate. There should be NO base coat under an illusion series powder. Apply powders cold. No need to hot flock. Apply your first coat and then bring to flow-out + 2 minutes (aka Gel-out). In other words, in about 3-5 minutes approx. the base coat will turn from a powder into a liquid looking coating, once this happens, add 2 minutes to your timer. After that flow-out + 2, pull and allow to cool. Apply your top coat. In this case, applying clear vision you will again apply cold (room temp) cover the base coat in a white powder. Place into the oven and follow the cure schedule for the Clear Vision. Which happens to be 375 degree F for 18 minutes. That 18 minute timer should not start until the THICKEST portion of your substrate reaches 375 degrees F. The curing of the clear coat will pull the underlying pigments to the surface giving you a brilliant color that you are looking for. Each coating should be around 3 mil thick. That is .003" thousandths of an inch not millimeter. There is a great video on our website for applying Illusion Malbec.
https://www.youtube.com/watch?time_continue=7&v=NCRt5weNbew&feature=emb_logo
See more projects using Illusion Sky Blue PMS-11819 in our gallery.
| Starting quantity | Price per lb | Savings |
|---|---|---|
| 1 lb | US$ 34.40 | — |
| 50 lb | US$ 32.68 | Save 5% |
| 200 lb | US$ 30.96 | Save 10% |
US$ 34.40 / per lb
Starting quantity: 1 lb
Total for 1 lb: $34.40
US$ 34.40
per lbPMS-11819
Illusion Sky Blue
US$ 34.40
/ lb