Need help?
Resources
Worldwide Shipping
Fast, reliable delivery
M-F 5am-5pm PST
Sat 7am-3pm PST
We are here to help
Trusted by Professionals
Exceptional Quality and Service
© 2026 Prismatic Powders. All rights reserved.
Made in the USAInnovations of NIC
The Prismatic Illusion Series is quite possibly the most user-friendly line of custom powder coatings on the market. The Illusion Series, which are dormant powder coatings, creates the look of an advanced two coat candy system with the ease of a simple base coat / top coat application. The possibilities and combinations are unlimited. Simply choose your illusion base coat and apply any Prismatic top coat to create an incredible array of new, exciting colors. Great for beginners and also for the seasoned professional looking to push the limits of what is possible. After the Illusion base is applied, do not be alarmed if the color is not what you were expecting. Because this is a dormant powder coat, the amazing transformation only takes place when the top coat is applied. Simply follow the detailed application guide.
IMPORTANT: Illusion colors only activate when a clear top coat is applied. See all our clears Here
Gloss: 71-85 Gloss Units
| Starting quantity | Price per lb | Savings |
|---|---|---|
| 1 lb | US$ 26.13 | — |
| 50 lb | US$Â 24.82 | Save 5% |
| 200 lb | US$Â 23.52 | Save 10% |
US$Â 26.13 / per lb
Starting quantity: 1 lb
Total for 1 lb: $26.13
US$Â 26.13
per lbPMS-11274
Illusion Bionic Frog
US$Â 26.13
/ lbInput
in
in
Output
0.00 ft2
1 lbs
Note on Custom/Large Orders: Bulk orders or specialized formulations may require additional lead time. If your order requires extra processing time, our team will notify you immediately.
No specifications available.
Rey Rivera
—
When applying an Illusion color like Illusion Orange PMS-4620 can any clear coat be used as the Illusion top-coat?
Answer from Admin
Any Clear Coat or Top-Coat can be used as an Illusion top-coat. Keep in mind that the end result will be different than the on-line S-panel representation or the sample swatches that are shipped out for reference. These images and swatches have Clear Vision PPS-2974 applied. You can find examples of other top-coats used including tinted transparent top-coats on our website gallery and "creations" section.
Mark Kampman
—
What is the proper way to cure Illusion colors before applying Clear Vision PPS-2974? I've read a few contradicting things. Want to make sure i get the best results possible.
Answer from Admin
Illusion series should only be applied directly over substrate. There should be NO base coat under an illusion series powder. Apply powders cold. No need to hot flock. Apply your first coat and then bring to flow-out + 2 minutes (aka Gel-out). In other words, in about 3-5 minutes approx. the base coat will turn from a powder into a liquid looking coating, once this happens, add 2 minutes to your timer. After that flow-out + 2, pull and allow to cool. Apply your top coat. In this case, applying clear vision you will again apply cold (room temp) cover the base coat in a white powder. Place into the oven and follow the cure schedule for the Clear Vision. Which happens to be 375 degree F for 18 minutes. That 18 minute timer should not start until the THICKEST portion of your substrate reaches 375 degrees F. The curing of the clear coat will pull the underlying pigments to the surface giving you a brilliant color that you are looking for. Each coating should be around 3 mil thick. That is .003" thousandths of an inch not millimeter. There is a great video on our website for applying Illusion Malbec.
https://www.youtube.com/watch?time_continue=7&v=NCRt5weNbew&feature=emb_logo
See more projects using Illusion Bionic Frog PMS-11274 in our gallery.
