Anti-Gas Primer is a light slate blue color. This color is an epoxy solid tone powder with a glossy finish.
Anti-Gas Primer is recommended for cast metal substrates
High Gloss: 85+ Gloss Units
*If using Anti-Gas Primer with a powder coating topcoat, the primer must be flashed before applying the top coat. Applying a clear top coat may improve UV resistance, weather stability, and the finish's overall durability. It is important to note that a top coat can alter the appearance, color, and/or finish of the base coat. Inconsistent mil thickness of the base coat or top coat can lead to uneven color results. Apply the base coat and top coat according to the recommended mil thickness listed. Wait until the part has thoroughly cooled before applying the top coat. After the top coat has been applied, fully cure according to the topcoat's recommended cure schedule.We strongly recommend spraying a test panel before applying any top coat, or additional base coats to your project. This ensures the final color meets your specifications and allows you to be fully prepared for any potential color or finish changes.Input
in
in
Output
0.00 ft2
1 lbs
Note on Custom/Large Orders: Bulk orders or specialized formulations may require additional lead time. If your order requires extra processing time, our team will notify you immediately.
No specifications available.
Stavin Emigh
—
When dealing with any of our primer products, it would be considered poor practice to fully cure the primer basecoat before moving onto your next color.
Our primers require only a partial cure before applying another color and should be removed from the oven once you visually confirm the powder has melted on the part(s) being coated.
Stavin Emigh
—
If I decide to use a powder coat primer, will I need to fully cure the primer before applying my next color/coat?
Answer from NIC Industries Inc.
When dealing with any of our primer products, it would be considered poor practice to fully cure the primer basecoat before moving onto your next color.
Our primers require only a partial cure before applying another color and should be removed from the oven once you visually confirm the powder has melted on the part(s) being coated.
| Starting quantity | Price per lb | Savings |
|---|---|---|
| 1 lb | US$ 21.57 | — |
| 50 lb | US$Â 20.49 | Save 5% |
| 200 lb | US$Â 19.41 | Save 10% |
US$Â 21.57 / per lb
Starting quantity: 1 lb
Total for 1 lb: $21.57
US$Â 21.57
per lbESS-11152
Anti-Gas Primer
US$Â 21.57
/ lb