Orange Glow

Orange Glow PSS-2876 does not require a base coat. However, if applied over a white base coat vs. sand blasted steel you could see a difference in overall brightness. Also, applying a base coat should be decided based on the application need. Perhaps a primer (either Zinc Rich ESS-10171 or Epoxy ESS-6518) should be used if applied over steel or aluminum that will be exposed to a wet environment.

Orange Glow is a very bright neon orange and we do not offer this same bright color in a textured or matte finish. You can apply a Matte Clear PPB-4509 to tone the gloss level down but that could also shift the color slightly. If you would like to see how this turns out we offer a 2-color panel spray-out sample option. Here are the details of this service:

If you would like a custom spray-out of any combination, we can provide that for a fee of $9.95 each plus shipping. This would be a custom panel with two coats of your choice. For a custom panel with three coats (base, mid and top coat), the fee is $14.95. The custom panels measure 3” x 5” and can take approximately 2 - 4 days to complete. Any order for such panels would need to be called in as they are not available online at this time.

There are a number of things that can cause a cured powder to look blotchy or discolored. Thickness, oven temperature, cure time, substrate static build-up, moisture in your air lines, contaminated substrate, lack of outgassing, etc., etc. I recommend sending pictures to technicalsupport@prismaticpowders.com and having our tech dept. take a look. Include pictures of the part in question in different angles, and make sure they are in focus and well lit. Also include the order number (pic of the bag label) and customer number (pic of the bag label).