FAQ
- Are these coatings available for sale to the public?
- What equipment is needed to apply these coatings?
- How thick should the coatings go on?
- How do I polish Chromex?
- Can you formulate a custom coating for me?
Q 1: Are these coatings available for sale to the public? |
| A: No, these coatings are designed for professional applicators. If you would like to have a component coated with one of our coatings, please call us or use our online applicator locator for an applicator in your area. |
Top
Q 2: What equipment is needed to apply these coatings? |
| A: On the basic end, all that is needed is a small spray gun, air compressor, sand blaster, and spray booth. If you wanted to apply all of our coatings you would need the above plus an oven and vibratory polisher. |
Top
Q 3: How thick should the coatings go on? |
| A: The recommended thickness for each coating varies. As a general rule these coatings go on very thin, anywhere between .25 to 2.5 mils. Be sure to read the product data sheet for recommended thicknesses. |
Top
Q 4: How do I polish Chromex? |
| A: First, lightly sand the piece with 0000 steel wool. Then either vibratory polish the piece or polish on a high speed buffing wheel. Polishing by hand is possible, but is less effective and does not produce the same brilliant finish. |
Top
Q 5: Can you formulate a custom coating for me? |
| A: Yes, please contact one of our friendly customer service reps at (541) 826-1922 for details. |
Top






